PEM 750-1 Series Aerating Jets are made of brass, bronze and copper, stainless steel fitted. PEM 750
Aerating Jets are waterlevel dependent. The narrow columnar "White Water" spray effect is adjustable as
to appearance and spray height by altering the water to air ratio with the lowering or raising of the lower part
of the air intake sleeve. Best, solid "White Water" spray effects are within the lower 2/3 range of "V". The UT
immersion of PEM 750-1 is affected by the air sleeve adjustment. The immersion of PEM 750-2 will not
be affected by the new for 1992 water to air ratio adjustment. These jets have to be protected from pool surging.
Debris strainers for 750-1 are made of bronze and brass, are required where floating debris is encountered.
(Not available as standard for PEM 750-2 but can be custom made, please enquire). Ball swivel mounting permits
directional adjustment (up to 17° off centerline).
Usage Notes:
Sleeve UP = Spray down and heavier.
Sleeve DOWN = Spray up and lighter.
| Product Code |
750-1AT |
750-1T |
750-1AF |
750-1F |
750-2T |
750-2F |
| 507-7110 |
507-7120 |
507-7130 |
507-7140 |
507-7160 |
507-6170 |
| Pipe Size (in.) |
4 |
4 |
4 w/ flange |
4 w/ flange |
4 |
4 w/ flange |
| Stream Size (in.) |
3.750 |
3.750 |
3.750 |
3.750 |
4 |
4 |
| Overall Height (in.) |
25 |
25 |
25 |
25 |
27.170 |
27.170 |
| Overall Diameter (in.) |
8.270 |
8.270 |
9 |
9 |
8.270 |
9 |
| Submersion Height (in.) |
21.750 |
21.750 |
21.750 |
21.750 |
22.280 |
22.280 |
| Overall Diameter w/ Strainer (in.) |
- |
9 |
- |
9 |
- |
- |
| Suction Screen (in.) |
0.750 |
0.750 |
0.750 |
0.750 |
1.0 |
1.0 |
