Cordseals

PEM J Series Cordseals are made of brass or 304 Stainless Steel and fitted with Neoprene glands.
All Cordseals can be supplied at extra cost in 316 Stainless Steel for use in seawater / saltwater.
Stainless Steel Cordseals are mandatory for USA. Be aware of grounding regulations for Wet Niches in USA.
An epoxy type, non releasing thread sealant is recommended for all cordseal NPT threads.



Product Image Item Name-
PEM J13-5 Cordseal

PEM J13-5 Cordseal

Combination Seal for sealing of brass or copper conduit entries carrying 16/3, 12/2 or 3 x 1.5mm size niche cable into junction or deck boxes with an...
PEM J13-7 Cordseal (Brass)

PEM J13-7 Cordseal (Brass)

Combination Seal for sealing of brass or copper conduit entries carrying niche cable into junction or deck boxes with internal (in box) compression...
PEM J13-7 Cordseal (Stainless Steel)

PEM J13-7 Cordseal (Stainless Steel)

Combination Seal for sealing of brass or copper conduit entries carrying niche cable into junction or deck boxes with internal (in box) compression...
PEM J13-8 Cordseal (Brass)

PEM J13-8 Cordseal (Brass)

Combination Seal for the sealing with an internal (in box) compression seal of 3/4" plastic conduits into junction or deck boxes carrying 16/3 AWG...
PEM J13-8 Cordseal (Stainless Steel)

PEM J13-8 Cordseal (Stainless Steel)

Combination Seal for the sealing with an internal (in box) compression seal of 3/4" plastic conduits into junction or deck boxes carrying 16/3 AWG...
PEM J14 Cordseal (Brass)

PEM J14 Cordseal (Brass)

PEM J14 Cordseals are used to connect most PEM submersible lightfixtures with 16/3, 12/2 and 3 x 1.5mm cable to junction boxes or cable lead-outs.
PEM J14 Cordseal (Stainless Steel)

PEM J14 Cordseal (Stainless Steel)

PEM J14 Cordseals are used to connect most PEM submersible lightfixtures with 16/3, 12/2 and 3 x 1.5mm cable to junction boxes or cable lead-outs.